ALIGNMENT AND BALANCING IN ROTATING EQUIPMENT

///ALIGNMENT AND BALANCING IN ROTATING EQUIPMENT
Date : 10 – 12 January 2011
Duration : 3 Days
Venue : Bandung(Hotel Golden Flower)
Investation Fee : IDR 5.950.000

REGISTER ONLINE NOW

Training Syllabus:

“ALIGNMENT AND BALANCING IN ROTATING EQUIPMENT”

TRAINING INTRODUCTION :

Misalignment and unbalance are two major causes of vibration in rotating equipment, vibration that means increased maintenance and reduced machine life. With proper alignment and balancing programs, reductions in maintenance and operating costs can easily reach into six figures per year. When shafts are misaligned, forces are generated that can produce stresses on the rotating and stationary components. Even when couplings do not fail from the stresses produced by gross misalignment, bearings and seals will most certainly fail under these conditions. In extreme cases of misalignment, even the shafts may fracture and break. Out-of-balance machine components are a principal cause of machinery vibration. The condition often is caused by less-than-perfect manufacturing, and it is routine for rotating equipment, reciprocating machines and vehicles. Mass balancing may be necessary if an operation or product requires quiet operation, high speeds, long bearing life, operator comfort, controls free of malfunctioning or a quality feel. There are three types of balancing machines: static balancing stands, hard bearing machines, and soft bearing machines. Static balancing stands do not require spinning up and can correct for static or single-plane unbalance only. They feature low cost and safe operation.
TRAINING MATERIAL OUTLINE :

  1. Mechanical Equipment Overview
  2. Rim and Face Alignment
  3. Reverse Dial Indicator Alignment
  4. Determine Balance Weight
  5. Combine Balance Weights
  6. Single Plane Balancing
  7. Dual Plane Balancing
  8. Laser Alignment & Balancing

TRAINING BENEFIT :

Ø   Participant can develop, implement and supervise the alignment process

Ø   Economize the time, money and company’s resources by implementing appropriate alignment and balancing

Ø   Prevent the company’s equipment and tools from damage and make the machine’s living period longer

Ø   Decrease the down time

Ø   Increase the profit

WHO SHOULD ATTEND THIS TRAINING?

Plant and Pipeline Operators, Supervisors, Engineers and Manager.

VENUE : Hotel Golden Flower, Bandung

INSTRUCTOR : Ir. Deddy Nugraha

TRAINING DURATION : 3 days

TRAINING TIME : 10 – 12 January 2011

INVESTATION PRICE/PERSON :

1.      Rp 5.950.000/person (full fare)  or

2.      Rp 5.750.000/person (early bird, payment before 3 January 2011) or

3.      Rp 5.500.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

1.      Training Module

2.      Flash Disk contains training material

3.      Certificate

4.      Stationeries: NoteBook and Ballpoint

5.      T-Shirt

6.      Bag

7.      Training Photo

8.      Training room with full AC facilities and multimedia

9.      Lunch and twice coffeebreak everyday of training

10. Qualified instructor

11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

“TRAINING INSTRUCTOR”

Ir. Deddy Nugraha is a dedicated experienced fulltime trainer and technical consultant since 2002. He holds a B.S. degree in Mechanical Engineering from ITB, Bandung. He has worked nationally in a wide variety of industries including: technology, aerospace, utilities, auditing, mining and institutions thus engaged as a corporate consultant. He also holds certifications for those particular fields from Snecma, France; Engine Support Inc., USA; Danobat, Spain; DNV, Singapore; MTU, Germany and FAA Auditor, USA. Mr. Nugraha is a member of Indonesian Society for Reliability and was elected as General Sectretay for 2004-2007 period. He has trained hundreds of managers, engineers and floor associates, subjects taught to include; CMMS, RCM, TPM, Project Management, Quality Process Control, Corrosion Control and Protection, Failure Analysis, Engineering Design, Instalation & Constrcution, Inventory Control and Management. Major clients include: Pertamina, British Petroleum, Petrochina, Siemen Power, PT. Indonesia Power, PT. Krakatau Steel, Freeport Indonesia, PT. Surveyor Indonesia, Chevron, Medco Energy, PT. Aneka Tambang, Garuda Maintenance Facility, PT. Perusahaan Gas Negara, PT. Semen Padang, PT. Semen Gresik, PT. Indah Kiat Pulp & Paper, PT. Tjiwi Kimia, PT. Pupuk Kujang and PT. Kaltim Prima Coal.

INFORMASI TRAINING KE:

PT.MAIRODI MANDIRI SEJAHTERA (MMS)
Telp/Fax: (022)7215668 atau (022)7814149

SMS Center : 081809600076 atau 02272282252 atau 081322050262 atau 085860263043 atau 085222155409

Email : training@mairodi-training.com atau ptmmsbdg@gmail.com atau  ptmmsbdg@yahoo.com atau ptmmsbdg.marketing@gmail.com

Website : http://mairodi-training.com

Contact Person : Wahyu H,Alan Barok U,Yanti Deris Sutanty, Lita Permatasari, Dini Ratna Puri

SILAHKAN ISI FORM REGISTRASI BERIKUT :


REGISTRASI

Judul Training

Tanggal Training

Jenis Pesan

Data Diri

Nama Anda (required)

Job Title (required)

Company (required)

Company Address

Email (required)

Website

Mobile Phone (required)

Office Phone

Extensions No

Faximile

DATA PRE REGISTRATION (Tidak Mengikat)

Jumlah Peserta (required)

Nama-nama Peserta

Pesan untuk Penyelenggara Training

Isi kode gambar di bawah ini :
captcha

No comments yet.

Leave a comment

Your email address will not be published.

*