Date : a.15 – 18 October 2012
b.19 – 22 November 2012
c.10 – 13 December 2012
Duration : 4 Days
Venue : Hotel All Seasons, Yogyakarta
Investation Fee : IDR 7.250.000 (full fare)IDR 7.000.000 (earlybird)

IDR 6.750.000 (Group)

REGISTER ONLINE NOW

BASIC VIBRATION ANALYSIS

 

PENDAHULUAN:

Getaran pada peralatan mekanik merupakan fenomena alam. Fenomena tersebut menjadi menarik pada saat diketahui bahwa setiap komponen mekanik memiliki karakteristik yang unik, sehingga antara satu komponen dengan yang lain berbeda. Perkembangan kebutuhan yang menuntut kegiatan produksi tanpa henti membawa pada tuntutan keterdugaan kegiatan perawatan mesin. Kondisi mesin diharapkan selalu terpantau tanpa terjadinya ganggiuan pada proses produksinya, sehingga berkembang teknik pemantauan kondisi mesin dengan memanfaatkan keunikan sifat-sifat getaran setiap komponen mesin tersebut.

Pelatihan ini akan menjelaskan sifat-sifat dasar pada peralatan mekanik sehingga memiliki karakteristik getaran yang unik. Penjelasan berbasis pada fenomena alami diharapkan dapat memberikan kemudahan dalam memahami rumusan matematik yang biasa muncul pada analisis enjinering.

 

SASARAN TRAINING:

Peserta dapat memahami:

  1. Dasar-dasar getaran mekanik
  2. Dasar dasar pengukuran dan alat ukur getaran mekanik
  3. Cara kerja peralatan pengukuran getaran
  4. Prinsip sinyal domain waktu dan domain frekuensi
  5. Prinsip FFT
  6. Dasar-dasar Signature analysis

 

CAKUPAN MATERI TRAINING:

  1. Dasar-dasar getaran mekanik:
  2. Getaran mekanik dalam kehidupan sehari-hari
  3. Getaran sebagai fenomena alam
  4. Frekuensi alami, resonansi, putaran kritis, dan modus getar.
  5. Balancing statik dan dinamik
  6. Prinsip kerja mesin balancing
    1. Dasar-dasar pengukuran getaran:
    2. Dasar-dasar pengukuran
    3. Jenis-jenis sensor getaran
    4. Pengkondisi sinyal, filter, amplifier, integrator dan differensiator
    5. Pengukuran domain waktu dan domain frekuensi
      1. Dasar-dasar analisis sinyal:
      2. Jenis-jenis sinyal getaran pada mesin rotasi
      3. Dasar-dasar FFT
      4. Signature analysis

 

INSTRUCTOR :   Dr.Ir. Paryana Puspaputra, M.Eng., and Team

 

VENUE :   Hotel All Seasons, Yogyakarta

 

TRAINING DURATION :    4 days

 

TRAINING TIME :  

  1. 15 – 18 October 2012
  2. 19 – 22 November 2012
  3. 10 – 13 December 2012

 

INVESTATION PRICE/PERSON :    

  1. Rp 7.250.000/peserta (bayar penuh)  atau
  2. Rp 7.000.000/peserta (early bird, yang membayar 1 minggu sebelum training)  atau
  3. Rp 6.750.000/peserta (untuk peserta bergroup yang terdiri dari 3 orang peserta atau lebih dari 1 perusahaan yang sama)

 

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training

10. Qualified Instructor

11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

“TRAINING INSTRUCTOR”

Paryana Puspaputra was born in Kotabumi on January 19, 1964, is a Lecturer at the Department of Mechanical Engineering, Faculty of Industrial Technology, Indonesia Islamic University – Indonesia. Undergraduate from Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 1990 and master degree in Mechanical Engineering Department of Nagaoka University of Technology, Japan in 1996. He achieved his doctorate degree in Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 2012. He is also experienced as consultant and training instructure for several manufacturing and oil company, such as Chevron, Total, KPA, Petrokimia, Semen, Indonesia Power, etc. His background in mechanical equipment and machinery is completed with knowledge in instrumentation technology which was started from his final project in undergraduate by making software and data acquisition for predictive maintenance, and continued with his graduate thesis in control system for nano technology. There are researches and industrial implementation in data acquisition such as building the DNC system for production-shop using CNC machine, developing the balancing machine for Panasia Indosyntex – Bandung, SCADA system Development based on Fuji Electric control system (for IPAL – Pertamina – Cilacap, Toxic Gas Monitoring – Dieng – Central Java, etc). Moreover, he is also an official trainer of softwares for design and manufacturing base on CAD/CAM Technology (AutoCAD, Inventor, and Delcam PowerShape, ArtCAM) and familier with some finite element based analysys softwares such as Moldflow, ANSYS, SAP, CAESAR II, etc.

 

INFORMASI TRAINING KE:

PT.MAIRODI MANDIRI SEJAHTERA (MMS)
Telp/Fax: (022)7215668 atau (022)7215416

SMS Center : 081809600076 atau 02272282252 atau 081322050262 atau 085860263043 atau 085222155409

Email : training@mairodi-training.com atau ptmmsbdg@gmail.com

Website : http://mairodi-training.com

Contact Person : Wahyu H, Mira, Yanti Deris Sutanty, Aziz Aminudin

SILAHKAN ISI FORM REGISTRASI BERIKUT :


REGISTRASI

Judul Training

Tanggal Training

Jenis Pesan

Data Diri

Nama Anda (required)

Job Title (required)

Company (required)

Company Address

Email (required)

Website

Mobile Phone (required)

Office Phone

Extensions No

Faximile

DATA PRE REGISTRATION (Tidak Mengikat)

Jumlah Peserta (required)

Nama-nama Peserta

Pesan untuk Penyelenggara Training

Isi kode gambar di bawah ini :
captcha

No comments yet.

Leave a comment

Your email address will not be published.

*