Control Valve : Fundamental Principles, Sizing, Selection, Installation and Maintenance

///Control Valve : Fundamental Principles, Sizing, Selection, Installation and Maintenance
Date : 26 – 29 July 2010
Duration : 4 Days
Venue : Bandung(Hotel Golden Flower)
Investation Fee : IDR 6.450.000

REGISTER ONLINE NOW

Training Syllabus:

“Control Valve : Fundamental Principles, Sizing, Selection, Installation and Maintenance”

TRAINING MATERIAL OUTLINE:

Day 1

Ø  Sliding Stem Valve Bodies

Objectives :

Discussion will cover the many different types of valves, ANSI pressure classes, ANSI leak classes, trim styles, packing, and gaskets.

Ø  Actuators for Sliding Stem valves

Objectives :

Discussion will cover the operation of pneumatic spring and diaphragm and piston style actuators. Topic will cover bench set or spring adjustments, mounting on valves, and determination or fail modes.

Ø  Actuator Bench Set

Objectives :

Discussion will cover appropriate bench set adjustment procedures on spring and diaphragm actuators as outlined in the appropriate instruction manuals.

Day 2

Ø  Special and Severe Service Valves

Objectives :

Discussion will cover valves that are designed for high pressure applications, and corrosion service. Topics will include seals, gaskets, trim changes, and general maintenance procedures. A discussion on Cavitation and Flashing will also be covered.

Ø  Butterfly valves

Objectives :

Discussion will cover the butterfly and high performance eccentric disk valves. Topics will include seal replacements, operation, installation and flow directions.

Ø  Ball Valves

Objectives :

Discussion will cover the ball style valves with topics including seal replacements, operation, installations and flow directions.

Ø  Rotary Style Actuators

Objectives :

Discussion will include the operation of unique rotary pneumatic spring and diaphragm actuators. Travel adjustments, spring compressions, and fail actions will be covered.

Day 3

Ø  P/P Positioners for sliding stem & rotary valves

Objectives :

Discussion will cover the mounting and calibration procedures for the positioners that are mounted and calibrated on sliding stem and rotary valves.

Ø  I/P  Positioners for sliding stem & rotary valves

Objectives :

Discussion will cover the theory and operation of the I/P and how a current input signal is converted to a pneumatic output signal. Detailed calibration and maintenance procedures are outlined for I/P positioner.

Ø  Actuator accessories

Objectives :

A discussion on the operation and function of transducers, and accessories (transducer, trip valve, limit witch, volume booster, etc)

Ø  FIELDVUE Theory of operation

Objectives :

A discussion on the basic operation and function of Fieldvue systems

Ø  Instrument Configuration and Calibration / Trouble shooting.

Objectives :

A discussion on the trouble shooting of control valves & accessories

Day 4

Ø  Sliding Stem & Rotary Valves Sizing

Objectives :

Explains theory of sizing.  The discussion will include critical flow, sizing equation, steam sizing and the sizing procedure

Ø  Sliding Stem & Rotary Actuators sizing

Objectives :

A problem solving session covering the selection, sizing, and bench set of sliding stem actuators

VENUE : Hotel Golden Flower Bandung

INSTRUCTOR : Dr.Ir. Edi Leksono, M.Eng. and team

TRAINING DURATION : 4 days

TRAINING TIME : 26 – 29 Juli 2010

INVESTATION PRICE/PERSON : Rp 6.450.000, exclude tax

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Training CD contains training material
  3. For practice session : All softwares related to this training is supplied and installed to participants’ laptop/notebook by PT.MMS team / instructor
  4. Certificate
  5. Stationeries: NoteBook and Ballpoint
  6. Jacket or waistcoat
  7. Bag or backpackers
  8. Training Photo
  9. Training room with full AC facilities and multimedia
  10. Once lunch and twice coffeebreak every day of training
  11. Qualified and experienced instructor
  12. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

RECOMMENDATION FOR PARTICIPANTS:

  • For practice session: each participant is recommended to bring notebook/laptop for softwares installation and practice session

“TRAINING INSTRUCTOR”

DR. Ir. Edi Leksono, M.Eng. is alumnus from Physics Engineering Bandung Institute of Technology, ITB (Bachelor), Control Engineering Tokyo Institute of Technology Japan(Master), and Electrical engineering Keio University Japan. Now Dr. Edi Leksono is a senior professor at Engineering Physics ITB. He have been interacting with industry for more than 25 years for training, consultancy and project implementation in field of SCADA, PLC, DCS, Instrumentation and Process Control and also energy saving. He have taught most of companies in Indonesia for many topics related to his competencies and he has implemented real project in field for many companies in Indonesia. In his expertise in ITB, he have dedicated much scientific work, such as writing or translating text book, being researcher and publish to journal and being speaker in national and international conference.

INFORMASI TRAINING KE:

PT.MAIRODI MANDIRI SEJAHTERA (MMS)
Telp/Fax: (022) 7814149

SMS Center : 081322050262 atau 085860263043

Email : training@mairodi-training.com atau ptmmsbdg@gmail.com atau  ptmmsbdg@yahoo.com atau ptmmsbdg.marketing@gmail.com

Website : http://mairodi-training.com

Contact Person : Yanti Deris Sutanty, Lita Permatasari, Dini Ratna Puri,

Rike Maryani, Yustika Rini, Siti Marpiyanti

SILAHKAN ISI FORM REGISTRASI BERIKUT :


REGISTRASI

Judul Training

Tanggal Training

Jenis Pesan

Data Diri

Nama Anda (required)

Job Title (required)

Company (required)

Company Address

Email (required)

Website

Mobile Phone (required)

Office Phone

Extensions No

Faximile

DATA PRE REGISTRATION (Tidak Mengikat)

Jumlah Peserta (required)

Nama-nama Peserta

Pesan untuk Penyelenggara Training

Isi kode gambar di bawah ini :
captcha

No comments yet.

Leave a comment

Your email address will not be published.

*