PROCESS CONTROL INSTRUMENTATION

Training Syllabus:

PROCESS CONTROL INSTRUMENTATION

 

LATAR BELAKANG:

Pengendalian proses dalam industri dilakukan untuk menjamin bahwa proses yang dilakukan sesuai dengan yang diinginkan, sehingga kualitas yang didapatpun dapat dijamin. Pada pengendalia tersebut, data merupakan komponen sangat penting dalam pengendalian kualitas proses maupun bahan pertimbangan utama dalam pengambilan keputusan. Keakuratan komponen-komponen tersebut akan menentukan jaminan kualitas produk yang dihasilkan. Lebih lanjut, kesalahan dalam satu bagian proses pengambilan maupun pengolahan data dapat berakibat dapat fatal dalam industry. Hal tersebut terjadi karena pengambilan keputusan pada sistem kendalinya menjadi tidak akurat.

Kesadaran akan pentingnya akurasi pengukuran menuntut pemahaman akan karakteristik instrumentasi yang digunakannya, termasuk di dalamnya fasilitas komunikasi yang tersedia sebagai sarana antar muka (interface) dengan perlatan lainnya.

Mengingat pentingnya hal tersebut pelatihan diharapkan akan sangat membantu memberikan wawasan kepada para peserta mengenai  instrumentasi agar dapat bermanfaat  pada aktivitas di industri.

 

SASARAN TRAINING:

Peserta akan memahami:

  1. berbagai jenis alat ukur di lapangan
  2. Jenis-jenis kesalahan pada  instrumen pengukuran
  3. kesalahan yang muncul akibat sifat material sensor
  4. prinsip kerja alat-alat ukur dari berbagai jenis sensor
  5. akuisisi data: ADC, DAC, dll
  6. data komunikasi: RS232, RS422, RS485, dsb.
  7. pengendali proses: variable speed controller, PLC

 

CAKUPAN MATERI TRAINING:

  1. Jenis-jenis alat ukur dalam proses produksi dan cara kerjanya
    • Termal
    • Aliran
    • Tekanan
    • Level
    • Dsb.
  2. Dasar-dasar pengukuran
    • Istilah-istilah penting dalam pengukuran
    • Analog/digital
    • Mekanik/elektrik
    • Signal conditioning, amplifier, filter, dsb
    • Dsb.
  3. Kesalahan-kesalahan (yang selalu ada) dalam pengukuran
  4. Akuisisi data
    • Pengukuran arus dan tegangan
    • ADC, DAC
  5. Komunikasi data:
    • Komunikasi serial dan parallel
    • Protokol dalam komunikasi serial
    • Komunikasi data:
  • RS232,
  • RS422,
  • RS485, dsb

6. Sistem kendali proses

  • Variable Speed Controller
  • Programmable Logic Controller

INSTRUCTOR :   Dr.Ir. Paryana Puspaputra, M.Eng., and Team

 

VENUE :   Hotel All Seasons, Yogyakarta

 

TRAINING DURATION :    4 days

 

TRAINING TIME :  

  1. 22 – 25 October 2012
  2. 26 – 29 November 2012
  3. 10 – 13 December 2012

 

INVESTATION PRICE/PERSON :    

  1. Rp 7.250.000/peserta (bayar penuh)  atau
  2. Rp 7.000.000/peserta (early bird, yang membayar 1 minggu sebelum training)  atau
  3. Rp 6.750.000/peserta (untuk peserta bergroup yang terdiri dari 3 orang peserta atau lebih dari 1 perusahaan yang sama)

 

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training

10. Qualified Instructor

11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

“TRAINING INSTRUCTOR”

Paryana Puspaputra was born in Kotabumi on January 19, 1964, is a Lecturer at the Department of Mechanical Engineering, Faculty of Industrial Technology, Indonesia Islamic University – Indonesia. Undergraduate from Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 1990 and master degree in Mechanical Engineering Department of Nagaoka University of Technology, Japan in 1996. He achieved his doctorate degree in Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 2012. He is also experienced as consultant and training instructure for several manufacturing and oil company, such as Chevron, Total, KPA, Petrokimia, Semen, Indonesia Power, etc. His background in mechanical equipment and machinery is completed with knowledge in instrumentation technology which was started from his final project in undergraduate by making software and data acquisition for predictive maintenance, and continued with his graduate thesis in control system for nano technology. There are researches and industrial implementation in data acquisition such as building the DNC system for production-shop using CNC machine, developing the balancing machine for Panasia Indosyntex – Bandung, SCADA system Development based on Fuji Electric control system (for IPAL – Pertamina – Cilacap, Toxic Gas Monitoring – Dieng – Central Java, etc). Moreover, he is also an official trainer of softwares for design and manufacturing base on CAD/CAM Technology (AutoCAD, Inventor, and Delcam PowerShape, ArtCAM) and familier with some finite element based analysys softwares such as Moldflow, ANSYS, SAP, CAESAR II, etc.

SILAHKAN ISI FORM REGISTRASI BERIKUT :


REGISTRASI

Judul Training

Tanggal Training

Jenis Pesan

Data Diri

Nama Anda (required)

Job Title (required)

Company (required)

Company Address

Email (required)

Website

Mobile Phone (required)

Office Phone

Extensions No

Faximile

DATA PRE REGISTRATION (Tidak Mengikat)

Jumlah Peserta (required)

Nama-nama Peserta

Pesan untuk Penyelenggara Training

Isi kode gambar di bawah ini :
captcha

No comments yet.

Leave a comment

Your email address will not be published.

*